News Archives - IQonic

SENSAP results in the iQonic project

During the iQonic project our partner Sensap investigated the use of rfid tags to monitor the product lifecycle. The case study of this scenario...

Brunel University results in the iQonic project

Our partner Brunel University of London provided solutions during iQonic project for 2 use cases: Alpes Laser and Prima Electro. In Alpes, the solution...

ATLANTIS results in the iQonic project

Thank s to the iQonic project ATLANTIS Engineering managed to develop three really promising and high-valued systems: The Defect Detection Decision Support System (DSS) deployed in...

HOLONIX results in the iQonic project

iQonic KBS created by our partner Holonix is a SaaS solution addressing an advanced management of huge quantities of data, suitable for zero-defect oriented...

SACMI results in the iQonic project

With the aim of evaluating the contamination level of materials for earlier defect detection, our partner SACMI development of a electronic olfactory system (electronic nose)...

Shadow Robot results in the iQonic project

Filar-Optomaterials manufactures synthetic crystals through an industrial chain starting from raw material sintering until the supply of the final product to the end-user. In...

CORE results in the iQonic project

The assembly process of photonics and opto-electronic components includes many processing stages. To increase their production efficiency and reduce their costs, manufacturers urgently need...

POLIMI result in the iQonic project

Within the iQonic project Politecnico di Milano has successfully developed a Cyber-Physical System (CPS) for Prima Electro use-case. The overall methodology followed in order...

ficonTEC results in the iQonic project

Within the iQonic project ficonTEC developed the basic software tools for the streaming of data from and to the Process Control Master, the general...

iQonic_Final Review meeting

At the end of October, the iQonic Consortium met in Torino in the Prima Electro premises to hold the Final review meeting. Figure 1...

iQonic partner participation _ 9th Technology Forum

At the end of September, our partner ATLANTIS Engineering participated in the 9th Technology Forum taking place in Thessaloniki, Greece. The event comprises several...

Zero-defect manufacturing approaches for optoelectronics and photonics – the iQonic project within Horizon2020

In the context of the iQonic project, partners organized a final webinar to disclose an excerpt of the main results achieved after 42 months...

iQonic partner participation – EPoSS 2022_Strategies of AI-based defects prediction and life cycle management for optoelectronic production line

On October the 6th our partner Prima Electro will participate in the European Technology Platform on Smart Systems Integration (EPoSS) that will hold its...

Waveguide quality inspection in quantum cascade lasers: A capsule neural network approach | Brunel University London Publication

Thanks to the iQonic project our partners Brunel University London published a new paper this month titled " Waveguide quality inspection in quantum cascade...

Defect detection on optoelectronical devices to assist decision making: A real industry 4.0 case study | Joint Pubblication by SENSAP Swiss, Core Innovation, Brunel University, ATLANTIS Engeneering, Alpes Lasers and Fraunhofer IOF

At the end of August 2022, iQonic partners SENSAP Swiss AG, CORE Innovation, Brunel University London, ATLANTIS Engineering S.A., Fraunhofer IOF and Alpes Lasers...

Brighterwave Use Case_Workshop

On August the 4th, partners from the iQonic project gathered in Tampere, Finland at the Optoelectronics Research Centre (ORC) of Tampere University (TAU) to...

iQonic Project_ Final Webinar

After 42 months of hard work and collaboration, the iQonic project is coming to an end! Since we are approaching the end of this...

ALPES Lasers Use Case_Workshop

June 15th partners within the iQonic project gathered at ALPES lasers S.A. in St. Blaise near Neuchâtel, Switzerland, to discuss the ALPES quantum cascade...

PRIMA Electro Use Case_Workshop

At the beginning of June, partner from the iQonic project gathered in Torino at Convergent Photonics – Prima Electro production site to participate in...

Technology & Business Cooperation Days 2022 – ATLANTIS

This year the Hannover Messe 2022 was organized as a hybrid event. Online participation at the matchmaking event “Technology & Business Cooperation Days 2022”...

FILAR Use Case _ Workshop

On May 17th members of the iQonic project consortium met at FILAR Optomaterials SRL in Tortoli, Sardinia, to discuss the implementations and outcomes of...

6th ENGINE Newsletter | IQONIC

At the beginning of 2022, the IQONIC project appeared in the 6th edition of the EuropeaN diGital Innovation Network (ENGINE) newsletter presenting the latest...

High power disc laser crystal to heatsink bonding technologies

At the beginning of April 2022 the iQonic partners Fraunhofer IOF and HiLase met at Fraunhofer IOF’s facilities in Jena (Germany) to discuss the...

iQonic 4th Press Release | March 2022

TOWARD THE END OF THE IQONIC PROJECT On February 11th, 2022, partners met online for the 5th General Assembly of the iQonic project. The...

IQONIC 5th GENERAL ASSEMBLY

On February 11th, iQonic partners met online for the 5th General Assembly of the iQonic project. The event aimed at assessing what has been done...

5th ENGINE Newsletter | IQONIC

At the end of 2021, the IQONIC project appeared in the 5th edition of the EuropeaN diGital Innovation Network (ENGINE) newsletter. This initiative aims...

Deploy and running of iQonic KBS supporting the use cases | Web article by Holonix

Within its role of IT technical partner in defining solutions for zero-defect manufacturing in optoelectronics field in the iQonic project, Holonix has recently published...

2nd iQonic funded publication | Brunel University London

On December 10th, 2021 our partner Brunel University London published its second iQonic funded publication titled "An Improved Capsule Network (WaferCaps) for Wafer Bin...

iQonic partner participation – Digital Technology in Laser Manufacturing Workshop

In October, our partner Brunel University London participated in the Digital Technology in Laser Manufacturing Workshop held by the UK Association of Industrial Lasers...

Micro-optics assembly for fast axis collimation by means of convolutional neural network | Joint Publication by ficonTEC Service GmbH & Prima Electro S.p.A.

iQonic partners, ficonTEC and Prima Electro, collaborate on a joint publication about "Micro-optics assembly for fast axis collimation by means of convolutional neural network"...

Single-Mode Interband-Cascade Lasers | Alpes Lasers

The latest achievement in microfabrication by Alpes Lasers successfully manufacturing the Single-Mode Interband-Cascade Laser On July 27th Alpes Laser announced the successful manufacturing of...

iQonic video is online!

We are happy to show you the presentation video of the iQonic project! Advance in optoelectronics technologies is causing a revolution in consumer electronic...

A view at the high-resolution laser scanning used by FORTH

In this video Sotiris Psilodimitrakopoulos, Postdoctoral Researcher at FORTH, describes the elements of high-resolution laser scanner used to scan the the optoelectronics materials studied...

iQonic System Architecture

Many challanges affect opto-electronics and photonics industry nowadays, including the obsolescence of current manufacturing processes, the concurrent evolution of equipment and instrumentation, an higher...

“Three-dimensional characterization of collagen remodeling in cell-seeded collagen scaffolds via polarization second harmonic generation” Paper by FORTH

"Three-dimensional characterization of collagen remodeling in cell-seeded collagen scaffolds via polarization second harmonic generation" is the paper published by FORTH - iQonic partner specialised...

iQonic partners: the role of SACMI

In this series of articles we take a deeper look into the activity of iQonic project partners. An opportunity to understand and review the...

iQonic partners: the role of Sensap

In this series of articles we take a deeper look into the activity of iQonic project partners. An opportunity to understand and review the...

iQonic partners: the role of Shadow Robot Company

In this series of articles we take a deeper look into the activity of iQonic project partners. An opportunity to understand and review the...

iQonic partners: the role of Forth

In this series of articles we take a deeper look into the activity of iQonic project partners. An opportunity to understand and review the...

Data-driven IIoT Solutions | Paper by Holonix

In March 2021 Stefano Borgia from Holonix published a technical article on Italian technical journal “Data Manager” The technical paper provides a contribution about...

Technical meeting | ficonTEC & Sensap

Technical visit of Sensap AG at ficonTEC Service GmbH facility for the implementation of the data flow among the ficonTEC AL500 assembly machine, the...

iQonic use case – Prima Electro

PRIMA ELECTRO - High volume process chain zero-defect manufacturing Interview to Roberto Paoletti - Diode Fab Senior Manager What is the core activity...

iQonic 3rd Press Release | September 2020

Towards the development of the iQonic architecture for zero-defect manufacturing of optoelectronic components The 1st phase (M1-M18) of the iQonic project has just...

iQonic use case – Alpes Laser

ALPES LASER - Defect categorization, management and yield increase in high variant production Interview to Tobias Gresch, Process Design Manager at Alpes Laser...

iQonic use cases – Brighterwave

BRIGHTERWAVE - Shortening and improving the NPI process Interview to Tomi Jouhti and Antti Laakso Co-Founders at Brighterwave. What is the core activity...

IQONIC Participation at SPIE.Photonics West 2020 | San Francisco (USA)

On February 3rd - 6th iQonic partners joined at SPIE Photonics West, in San Francisco (USA), to present the project's activities and most promising...

iQonic 3rd General Assembly | Prague

On December 3rd-4th, iQonic partners came together in Prague for the 3rd General Assembly of the iQonic project. The event, hosted by HILASE aimed to...

IQONIC’s numbers

The IQONIC project aims at achieving flexibility, zero-defect production and sustainability in the manufacturing of optoelectronic components. To reach this purpose, the IQONIC consortium...

Event Modeling in the Manufacturing process: IQONIC Initiatives

Event Modelling in the Manufacturing process: IQONIC Initiatives In the last few months, IQONIC partners have been working on the data acquisition and collection...

2nd Technical Meeting in Filar OptoMaterials | Tortolì

On July 19, IQONIC technology providers met in Tortolì, Italy, for the 2nd Technical Meeting at Filar OptoMaterial. The meeting focused on the implementation...

Press Release, July 2019 – IQONIC 2nd General Assembly at the Politecnico of Milan

On May 22nd-23rd the Politecnico of Milan (Italy) hosted the 2nd General Assembly of the IQONIC project . The project, which inserts into the...

iQonic 2nd General Assembly | Milan

On May 22nd-23rd iQonic partners came together in Milan for the 2nd General Assembly of the iQonic project. The event, hosted by the Politecnico...

iQonic Networking – developing relations and knowledge on the iQonic results

In the last few months iQonic partners have been participating to a series of events, conferences, forums regarding not only optics, optoelectronics and nano-photonics...

Technical meeting in Filar OptoMaterials | Tortolì

Technical meeting in Filar OptoMaterials | Tortolì The iQonic technical meetings come to an end: on March 18th iQonic partners met in Tortolì, Sardenia...

Technical Meeting in Prima Electro | Moncalieri, Torino

The iQonic technical meetings continue: on February 26th iQonic partners met in Moncalieri (Italy) to visit Prima Electro S.p.A. Prima Electro is a division...

Technical meeting in Alpes Laser | Neuchatel

In the frame of the on-site visits to the project end-users foreseen by iQonic, project partners met in Neuchatel, Switzerland, on 21st January, for...

Technical Meeting in ficonTEC | Achim

The 17th December 2018, iQonic consortium gathered to visit ficonTEC facilities in Achim, Germany. FiconTEC is part of iQonic project and is fulfilling...

iQonic Kick-off meeting | Brussels

The iQonic kickoff meeting held on October 26th 2018 in Brussels set the official start of the project. The aim of the meeting was to outline the...